When the heavy vehicle is ready to enter the high-altitude vehicle. The aerial work vehicle is in the zero position, the platform should be aligned accurately, and the brake shoe on the platform is in the raised position. When the crane enters the aerial work vehicle. A set of wheelsets of the vehicle contact the brake shoes. Under the action of hydraulic buffers. Make the vertical car level punching and positioning.
After the repositioning of the vehicle, the electric motor of the aerial work vehicle starts and the rotor starts to rotate. When the rotor rotates 30-5., the platform and the heavy vehicle are under the action of their own weight and spring installation. Move to the pallet beam, and make the side of the vehicle lean on the pallet beam. When the positioning rollers at both ends of the platform separate the platform stopper on the base and the rotor continues to rotate, the vehicle and the rocking mechanism on the movable platform rotate with the rotor without relative movement. When the rotor turns to 540. The platform, the vehicle and the rocker arm mechanism begin to break away from the bottom beam together.
The related rotor moves in parallel along the crescent-shaped guide groove until the upper side of the vehicle contacts the press beam to compress the vehicle. Different types of vehicles have different moving strokes when they are pressed. For vehicles with a short stroke, the vehicle can be compressed when the rotor is turned to 650. Vehicles with long journeys. The vehicle can be pressed when the rotor is turned to 850.